What are Red Oxide Metal Primers? & Benefits

Red oxide metal primers act as a preparation or protective coating that prevents ferrous metal surfaces from rusting when in contact with moisture and air. The primer used for gates, railings and outdoor equipment is applied to the rusted surface before applying the topcoat.

Red oxide metal primers are different types of base paints that prevent steel from rusting, as non-coated steel rusts faster. Instead of resting on the surface, the primer chemically binds the steel so that it will not chip.

Red oxide metal primers

Benefits of Red Oxide Metal Primers

Acts as a binding medium for paint coatings.

To smooth the surface red oxide zinc chromate primers can be applied to the porous material so that the latter coatings give the best results.
Its anti-corrosion properties eliminate the possibility of corrosion on the surface of ferrous metals.
Metallic primer increases the durability of the paint and extends the life of the material.

Uses of Red Oxide Primer

In general, red oxide primer is applied to the exterior and interior of ferrous metal surfaces. The product has excellent opacity and adhesion properties. Note, however, that the metal primer differs from the red oxide primer in that it comes with corrosion-resistant and corrosion-resistant properties.

Red oxide primer is made for ferrous metals with ferrous components. You can use a magnet to determine the type of metal. Unlike non-ferrous metals, ferrous metals have magnetic properties. This primer variety is also not suitable for bituminous or asphalt surfaces.

How to prepare the surface before applying red oxide metal primers?

Before applying Red oxide metal primers to the surface, make sure that it is free from oil, grease, dust and dirt. The layer should be extremely clean. It is best to clean the surface using a good quality degreasing solution. This will not only clean the surface but also make metal components for paint overcoating.

Remove flaky and loose material using sandpaper, paint scraper or wire brush. However, in some cases, grit blasting or flame cleaning may be required to prepare the metal surface for the primer coating.

Precautionary Measures to Ensure Safe Handling of Red Oxide Metal Primers

Safe and standard procedures must be ensured when using a red oxide primer to reduce the risk or danger of injury. Do not use a red oxide primer near any ignition source (such as cigarettes or open flames) as the product is flammable.

Open the doors and windows of your workspace when working with Zigma Paints Red Oxide Metal Primers (Gold Series). Choose the right ventilated area for work. Alternatively, you can work outdoors. Don’t forget to wear a painter’s mask, protective clothing, safety gloves and goggles to protect yourself from spray and vapor inhalation.

Zinc chromates made by Zigma Paints (P) Ltd. come in two basic forms: red oxide zinc chromate primers & red oxide metal primers for protective coating. We also offer the following paints to our numerous customers: Polyurethane Aromatic Paint, Protective Coatings Polyurethane Paint, PU White Matt, Pu Matt Exterior, Epoxy Polyurethane Paints, PU Car Paint, Polyurethane Waterproof Paint, Polyurethane-Acrylic Aliphatic Paint, Polyurethane Enamel Paint, Polyurethane Floor Paint, Polyurethane Clear Paints, Chemical Resistant Polyurethane Coating Paint, PU Colors Interior Paint, Aromatic Polyurethane Paint etc. as per clients need.

More about information for Red oxide metal primers Suppliers & Manufacturers then Visit our site –

https://www.zigmapaints.com/red-oxide-zinc-chromate-primers.php

What is Paint Thinner? How to use paint thinner?

What is Paint Thinner?

Paint thinner is one of the most common industrial chemicals and it is also the most versatile. In addition to thinning paint products for use and cleaning, paint thinners are great for other industrial cleaning applications — removing stains, grease and more from certain surfaces. As such, you have several options for the specific chemicals that can be used to thin and clean your paint.

Paint thinner is a solvent used to reduce the thickness of oil-based paints or to clean them after use. They can also be used to bind tar and remove other compounds.

Professionally, solvents labeled “paint thinners” are usually mineral spirits with a flashpoint of 104 ° F (40 ° C).

**What is Paint Thinner? How to use paint thinner?**

White spirits and other paint spirits can be used as oil-based paints, varnishes and acrylic paint thinners – white spirits and paint thinners can also be used after a hard day’s work or to reduce grease. Can also be used as an effective. Paint for use with paintbrush cleaner paint spray machine.

Zigma Explains Paint Thinner

There are many different components that can be used as a paint thinner. In general, what is called paint thinner is a mineral soul. Mineral spirits, also called white spirits, are made from hydrocarbons left over from petroleum distillation. Other materials used as paint thinners include:

Turpentine
Isopropyl alcohol
Naphtha
Acetone
Methyl ethyl ketone (MEK)
Dimethylformamide (DMF)
2-Butoxyethanol
None of the other glycol ethers

Some of the other solvents used in paint thinner products include:

Ethylbenzene
Xylene
N-butyl acetate
1-Butanol

Paint thinner solvents have many uses in household and industrial chemical cleaning processes. Paint dilute solvents are best suited for shellac products and do not damage other coatings. Many paint dilute solvents are strong, corrosive inorganic acids made from hydrogen chloride. Common uses of paint thinners include brick cleaning, concrete excavation, and swimming pool maintenance. While some paint thinners are destructive to cellulose, muriatic acid is a good example.

The potency of paint dilute solvents is much higher than that of other chemical products. Frequently used paints have low chemical odor and low toxicity.

How to Thin Paint

Choose an Appropriate Thinner

Buy thinners that are suitable for the type of paint you are using and the method of use. For example, if you are spraying paint on a surface, you will need a thin mixture of paint. Paint thinners for latex paints are not suitable for oil based paints and vice versa. Read all label instructions and information. If you need additional help, experts at your local True Value hardware store can help.

Use the Right Amount of Thinner

Use small amounts at a time. Check paint container labels for manufacturer-recommended paint-to-paint mild ratios. It is important to keep the amount of paint higher than the amount of thin paint. If not, the paint may be too thin and the finished surface color may be lighter than desired. Just keep in mind that each type of paint and application method requires specific consistency and technique. For example, when spraying paint, the mixture should be very thin so that the paint gun does not get stuck.

To mix paint and thinner, follow all manufacturer’s instructions and measure the amount of paint and pour into mixing bucket. Apply one thin layer at a time, stirring with a paint stirrer. Check the uniformity from time to time, mix the paint and dilute for a few minutes.

Test the Mix

Apply two coats of your paint / thinner mixture to the desired surface using your chosen method, then go back and evaluate the results. Make sure the paint layer completely covers the surface and you can’t see the surface beneath it. Also, make sure that the paint does not drip or leak too much. If the paint is not thin enough, add a little thinner to the mixture and reapply for testing.

More about information for paint thinners then Visit our site –

https://www.zigmapaints.com/epoxy-thinner.php

How Epoxy Paint Used in Industrial Surfaces?

Epoxy coating is a coating compound consisting of two distinct components: an epoxy resin and a polyamine hardener. When mixed, the resin and the hardener have a chemical reaction that creates a cross-linking of the elements as it cures. When the epoxy coating is fully cured, the resulting product is a durable, rigid plastic coating with a wide range of desirable mechanical properties. Zigma Paints Pvt. Ltd. is producing Epoxy Paint for all product categories.

Epoxy paints are known for their outstanding mechanical properties, such as hardness and durability, abrasion, impact and chemical resistance. These attributes make the epoxy paint an ideal protective coating material for components in demanding industrial settings. Epoxy surface paint protects surfaces, strengthens materials and protects them against corrosion and decay, making epoxy one of the most widely used industrial finishes.

As epoxy paint suppliers and manufacturers we understand a great product and enhance the position of our market through standardized, tailor-made and efficient solutions. The success of Epoxy Powder Paint by Zigma Paints Group is now enhanced by continuous innovations, better formulations, knowledge and advanced technology for the wide area of application.

Characteristics of true paint on floor:

Two-part product in which resin is mixed with hardener/activator
Will be labeled “100 percent solids”
Costs are typically $200 or more per kit
Often applied in conjunction with vinyl paint chips
Dries fully hard in no more than 24 hours
Extremely smelly to apply; adequate ventilation is a must
A very hard and long-lasting surface

Industrial floors made of concrete, even those made of hardening surfaces and mechanical smoothing, but especially those made of ordinary concrete or terrazzo, do not generally comply with the requirements set out above. The application of brushable Epoxy Paints suppliers, on concrete floors, successfully meets requirements for moderate mechanical and chemical strength and provides a good aesthetic finish.

It is a colored 2-component solvent-free epoxy system. Once it has hardened, it forms an easily cleaned final surface that displays great durability and strength against friction as well as resistance to chemical effects, e.g. to thin organic and inorganic acids, alkalis, petroleum products, wastes, water, sea water etc.

Epoxy paint for Walls – Safe & Clean Environment

An epoxy paint is also applicable for walls as they are quick and simple to apply, and in no time create strong, hygienic, and easy to maintain surfaces that leave your space looking great. Particularly in situations where chemical resistance, light reflectivity and sanitation are important; epoxy wall is a perfect choice. It can prevent the growth of harmful bacteria and withstand moisture that leads to hazardous moisture. This is important in food preparation and handling areas, correctional facilities, locker rooms, hospital operating rooms, veterinary clinics and more.

Unlike high-performance Epoxy Paints manufacturers, wall coatings are not formulated with the proper abrasion and chemical resistant polymers necessary to hold up over time. On the other hand, scratches, scrapes and other surface damage do not match the quality of the epoxy wall paint. Epoxy paint works for walls by eliminating seams and cracks that can harbour water and cause unsightly and unsafe damage. Our epoxy paints work particularly well over concrete walls, which are prone to cracks and easily show flaws and imperfections.

At Zigma Paints Pvt. Ltd., we use durable Epoxy Paints manufacturers compounds to offer epoxy paint for flooring application services. If you are interested in knowing more about how our epoxy paint can create a durable and attractive flooring surface for your commercial or industrial facility, please feel free to contact our epoxy powder paint application company.

More about information for Epoxy Paints manufacturers then Visit our site –

www.zigmapaints.com/epoxy-powder-coating-paint.php

Benefits, Meaning & Advantages of PU Paint

What Does Polyurethane Thinner Coating Mean?

Polyurethane Thinner coating is a PU Paints coating that is applied to protect the surface of the substrate. These coatings help protect the substrate from various defects such as rust, weathering, abrasion and other deteriorating processes.

Polyurethane is a type of polymer that binds to a group of chemical compounds known as carbamates. This polymer material is also thermosetting in nature; In other words, when heated, it burns instead of melting. Another feature of PU Paints coatings is its adaptability. These coatings can be made glossy, muted, opaque or transparent.

**Benefits, Meaning & Advantages of PU Paint**

Polyurethane is a protective coating that forms a solid layer of plastic when applied to a wooden surface. These finishes mainly contain resins which make them stronger than standard varnish or lacquer; It is highly flexible so it works well even on curved surfaces. Polyurethane coatings give wood excellent resistance to abrasion, abrasion, rough use and leakage; In addition, it is highly resistant to boiling water and harsh chemicals like alkali or acid. So, if you are looking for a hardware clear finish for wood, you need to know about polyurethane coatings.

Benefits and Advantages of Polyurethane Thinner

PU Paints is a synonym for versatility. The mechanical properties of Polyurethane Thinner unique elastomers can be handled and separated by polymeric creativity which makes it easy to solve problems with high-efficiency. The benefits and advantages of this material are limitless.

Below are some of the benefits and advantages of Polyurethane Thinner:

Filling the Gap Between Rubber and Plastic

PU Paints are able to withstand higher loads than rubber because they are harder than rubber and more flexible than plastic. Their flexibility is responsible for their strength and remarkable ability to resist impact.

Abrasion Resistance

Polyurethane Thinner is the perfect choice for application against severe wear regardless of low temperature. For decades, they have been the most widely used materials for the environment due to their excellent ability to resist abrasion. Elastomers, metals and any other type of plastic do not have better abrasion resistance than Polyurethane Thinner. Their abrasion resistance is rated to be 10 times better than other materials.

Oil and Chemical Resistance

Like their abrasion resistance, the properties of PU Paints Thinner materials are highly resistant to oils and chemicals. This enables them to maintain stability (with minimal swelling) in water or oil etc. If you are looking for elastomer materials for use in submarines, then Polyurethane Thinner should be your ideal option.

Affordable manufacturing process

Products such as prototypes as well as one-time products or one-off parts are often made using polyurethane.

Polyurethane Thinner Resilience

Flexibility is usually a product of rigidity. is a suitable alternative for elastomer applications that can absorb shock. They have excellent vibration frequency or excellent ability for quick recovery. Their extraordinary flexibility ensures that Polyurethane Thinner is a very hard material.

Zigma Paints Pvt. Ltd. are catering to some of the top notch Industries in India by doing customization of Polyurethane Coatings and Paints as per clients need. Our exclusive Polyurethane PU Paints thinner are also available as per specific needs of the clients.More information about then Visit – https://www.zigmapaints.com/pu-polyurethane-thinner-paint.php

What is Liquid Paint? And their benefits

Liquid Paint Advantages

WHAT IS LIQUID PAINT?

When choosing a paint method for your product, there are several options to choose from. Powder and paint technology has obvious advantages in many situations, but many Liquid Paint advantages are also worth considering. Each product line or part presents unique coating challenges and requirements. In most cases, the tried and true wet paint option offers the most benefits.

Comparing the Technologies

The advantages of liquid paint over two other popular coating technologies are well understood. Both powder coating and coating (electro-deposition) rely on electrification to adhere to the surface of the paint. Powder coating involves static electrification of dry pigment particles, whereas coating involves electrification of liquid paint solution.

**What is Liquid Paint? And their benefits**

While the advantages of liquid paint over new and more precise application equipment and techniques are becoming more apparent, electronic technology is considered to be extremely beneficial for many applications that require a uniform film layer and less waste. Both powder coating and coating increase corrosion protection, increase wear resistance and increase adhesion.

Liquid Paint Advantages to Consider

Despite these new technologies, manufacturers are often presented with a demand situation for wet coatings. And in these cases, there are several liquid paint advantages to consider.

More Choices

Liquid coatings offer more color and customization options than electrical. Special coat liquid paints like Teflon and Glow-in-the-Dark have advantages that are not possible with other techniques. Wet paints include polyurethane, acrylic, polyester, silicone polyester and more. These different types of options are especially useful for applications in specific markets.

Thinner Coats

Powder coating is often considered less wasteful and therefore more efficient than liquid paint. And in many cases, this is also true. Indeed, the powder coating is extremely effective in catching and reducing waste. But wet paints usually produce a thin coating, so less paint is needed for the actual coating. Thus liquid paint is also efficient, as it translates into a less mixed material for the coating process.

Easier Masking

Many products require special masking in addition to the basic coating. High-temperature treatment cycles make it difficult and expensive to mask in powder or electro-deposition. Traditional liquid painting usually does not require high-temperature treatment to set the coating.

Smoother Surface

Powder coatings are more likely to form “orange peel” textures. However, wet paint usually dries more easily for a shiny and less textured appearance.

The world of industrial coating offers many options for hand work. Whether you are coating automotive parts with a special finish, consumer equipment or military equipment, there are several factors to consider when choosing a coating method. Liquid paint has many benefits depending on your situation. Consider your specific needs and the different characteristics of each method to ensure a profitable and high-quality finished product.

Why Outsource?

Liquid coating systems with appropriate equipment such as treatment systems for process chemicals represent significant capital and personnel investments. For low-to-medium production volumes, outsourcing can be an attractive way to reap the benefits of commercial liquid paint applications without the additional cost of running an in-house coating line.

When product volume reaches a level that can do justice to an in-house system, the decision to outsource liquid paints becomes more complicated than the “make or buy” valuation. At that point, it also becomes a “strategic” decision that requires answers to two basic questions: “What is our business?” And “Do we want to run a coating operation?”

Here are a few of the advantages of outsourcing with Zigma Paints Coatings Services:

Project Analysis: Zigma Paints contributes to the development of coatings services; It then implements and supports the most effective process for meeting and exceeding customer objectives.

Buildings and equipment: Zigma Paints Coatings Services designs, manufactures and manages coatings operations for maximum productivity related to the customer’s product.

Coating Applications: Jigma Paints Coatings service provides highly trained staff for complete custom coating system management.

Other Liquid Paint Characteristics

Zigma Paints Coatings also recommends liquid paints for specific applications to take advantage of the following features of the service technology: /

Liquid paint provides curing temperature versatility. Some formulas can heal at room temperature, while others can heal faster in a baked oven.
Unlike e-coat or powder coat, liquid paint can be applied to fully assembled equipment such as large construction or material handling products.
Masking is more feasible than others. Coating mechanism.

Established in 1992, Zigma Paints (P) Ltd. has carved out a name for itself in the list of top suppliers of liquid paint, primers, paints & coating solutions in India. The supplying company is based in Nashik, Maharashtra and is one of the sellers of listed products..

Zigma Paints (P) Ltd. We have been involved in manufacturing and offering high quality products of Liquid Paints for many years.

More about information for Liquid Paint then Visit our site :-

https://www.zigmapaints.com/liquid-paint.php

5 Main Benefits of Using Strong Polyurethane PU Primers

Top Quality Polyurethane PU Primers Paint

PU Primer

Zigma Paints(P) Limited PU primers is a high performance penetrating polyurethane-based primer-sealer for bonding or coating substrates. It is a perfect choice for renovations and roof features for better performance to give peace of mind.

It is suitable for use on porous substrates such as concrete, wood and fiber cement sheets. It sticks to existing asphalt, as well as bituminous membranes, and allows the accumulation of loose minerals on the primer RBM (reinforced bituminous membrane) cap sheet. It is also compatible with polyester, polyurethane, acrylic and bituminous coatings and adhesives.

It is an ideal product to help and enhance the adhesion of porous substrates and it is moisture tolerant which will react actively and heal in the presence of moisture in the substrate.

**5 Main Benefits of Using Strong Polyurethane PU Primers**

High coverage rate per liter
Fast drying time
Multipurpose primer
Simple application
Suitable for substrate preparation
Strong, permanent polymer bond

What Is Polyurethane And How Is It Made?

Are you also looking for ways to protect your building, extend its life, improve its appearance and save on your energy bill? If so, adding a Polyurethane PU Primers coating is the answer you are looking for.

There are several advantages to adding Polyurethane PU Primers finish to the construction of exterior buildings. Here are five key reasons why you should apply a polyurethane finish to your building surface. After reading this you will be ready to order.

Protection

Polyurethane PU Primers finishing with epoxy primers basically creates a smooth protective barrier on the surface to which it is applied. This barrier is almost impervious to atmospheric elements such as humidity, salts and ultraviolet light, so it keeps weather elements away from the material on which the coating is applied.

Polyurethane finish provides protection from rust when mixed with epoxy primer. In coastal environments, it is especially useful to prevent salt and sand from damaging buildings and other structures.

Polyurethane Primers finish protects concrete and steel from harmful chemicals. In addition, it protects against harmful bacteria, bird droppings, dirt and debris from construction materials.

Due to these advantages, Polyurethane PU Primer finish is widely used in the construction industry. To go without it would be to take several risks, which could be costly in terms of increasing maintenance costs and shortening the life cycle of the coating.

Versatility

Polyurethane finish with epoxy primer can be applied to most types of materials. It can be used on structural steel, non-ferrous metals, engineered foam systems, engineered plastic systems and more. Once cured, the aliphatic polyurethane finish does not contain harmful chemicals so there is no need to worry about whether it is appropriate to use this finishing material.

The versatility of polyurethane is one of the most widely used coating materials in all types of construction, including sealants, adhesives and coatings.

Polyurethane coatings are also versatile in their variety of finishes. Polyurethane PU Primers finishes are available in metallic, pearl and solid color finishes for the commercial-architectural market, in a spectrum ranging from gloss to matte / flat. Polyurethane PU Primers coatings are often applied using a brush, roller or spray.

PRODUCT ADVANTAGES

Uniform Top Coat – Garland PU primers with its unique bleed blocking properties prevents coatings from staining and deformation when applied to asphalt and charcoal asphalt roofs.

Provides maximum adhesion to the surface – Garland PU primers ensure a long lasting elastic bond between the existing roof surface and the Arland finishing material which acts as a weatherproof.

Top Quality Polyurethane PU Primers Paint Suppliers & Manufacturers in India

Polyurethane PU Primers are used successfully as coatings on fiberglass, wood, steel, gypsum, concrete, marble, metal, glass or even galvanized surfaces. They adhere to these surfaces with a high level of adhesive, filling as well as film coating. It is easy to use, quick drying, resistant to chemicals as well as abrasive.

Zigma Paints (P) Limited was established in 1992. Paints in India has earned its name in the list of top Pu primers suppliers. The supply company is located in Nashik, Maharashtra and is one of the sellers of listed products.

Zigma Paints (P) Ltd. We have been involved in manufacturing and offering high quality products of Polyurethane PU Primers for many years.

More about information for Polyurethane PU Primers Paint Suppliers & Manufacturers then Visit our site –

https://www.zigmapaints.com/pu-primers.php

Top Quality Pure Epoxy Powder Coating Paint Suppliers & Manufacturers in India

PURE EPOXY POWDER COATING POWDER MANUFACTURER IN NASHIK

Pure Epoxy Powder Coating Give Optimal Hardness And Protective Chemical Resistance Performance.

Pure Epoxy Powder is perfect for providing optimal hardness and protective chemical resistance to your products.

Epoxy powder coating is recommended for products that require excellent resistance to chemicals and rust. This coating is recommended for items such as submersibles, washing machines, chemical pipelines and more. Zigma Paints Pvt. Ltd. is a reputed company that manufactures and supplies these epoxy powder coatings. The products we manufacture give the products a durable finish and are able to protect them from chemical effects and other damages.

These coatings have smart static charging properties and the ability to transfer easily. It is recommended for industrial parts and equipment that require a rounded coating. This epoxy powder coating generally provides good protection from the effects of rust and abrasion.

The perfect combination of its physical, chemical, mechanical and thermal properties makes epoxy an ideal solution for use as a protection for a wide variety of products.

**Top Quality Pure Epoxy Powder Coating Paint Suppliers & Manufacturers in India**

PURE EPOXY POWDER FEATURES

Improved adhesive power and strength bound
Extended life for coated surface/products
Non-toxic and non-solvent
Latest technology and quality-rich

We are renowned for providing Industrial Epoxy Powder Coating solutions

From protecting the pipeline to sealing the surface of the warehouse, the epoxy powder coating protects the floors from rust and rust, making it a widely used industrial flooring finish. Pure epoxy powder coatings for protective purposes of the pipeline with good chemical resistance. An epoxy coating is applied to concrete floors to provide a high performance, smooth and durable surface that lasts for many years and can withstand heavy loads.

The cost of epoxy powder coating can be higher than other types of coating materials, which provides excellent and durable corrosion resistance and flexibility to apply the coat when the material is well formed. Many industrial and commercial buildings apply Pure Epoxy Powder to maintain clean and safe conditions for workers and equipment.

Industrial Coating Powder : Defend against corrosion and abrasion.

Epoxy coating powder has chemical resistance, elasticity and high adhesion properties. The Pure Epoxy Powder series is designed to give optimal mechanical properties and excellent protective properties. Therefore, Pure Epoxy Powder protects many industrial equipment from rust and abrasion. This unique combination of thermal, physical, chemical and mechanical properties makes epoxy ideal for use as a functional coating for substrate protection for a variety of applications. Examples include industrial equipment, automotive underbody components, steel plumbing coatings, concrete floor paints, metal furniture and appliances.

Epoxy Coating is packaged in two parts prior to applications:

Epoxy resin that is cross linked
a co-reactant or hardener.

Properly catalyzed and applied, epoxy produces a chemical and solvent resistant finish. It is the selection and blending of epoxy and hardener components that determine the final characteristics and suitability of the epoxy coating for a given requirement. These coatings are formulated based on the performance requirements of the final product.

Epoxy Protective Coating for Flooring Applications

Pure Epoxy Powder for floors is durable and long lasting. Epoxy coatings are used in a variety of industrial applications such as manufacturing plants, commercial and retail stores, industrial plants, warehouses, hospitals, showrooms and more. Epoxy coating floor paints offer a decorative and high gloss finish that is available in a variety of colors and styles.

Zigma Paints Pvt. Ltd. Is producing epoxy paints for all product categories. We consider it an excellent product and increase our market share through standardized, quality and efficient measures. The success of Zigma Paints Group’s Epoxy Powder Coating Paints is now constantly increasing with the latest inventions, excellent formulations, knowledge and advanced technology, so we are here to provide specialized epoxy powder coating systems for various fields.

More about information for Pure Epoxy Powder then Visit our site – https://www.zigmapaints.com/epoxy-powder-coating-paint.php

Industrial Paint: Information and Characteristics

Information about industrial paint

Proper selection of industrial paints and coatings to achieve optimal finishing, resistance and durability when painting or re-painting, in industrial environments, where there is daily surface wear and high exposure to physical and chemical elements.

When choosing an industrial paint or other type, there are several conditions to consider. Therefore, in this content, we will focus on providing valuable information to industrial customers in their decision making process.

Knowing the types of existing industrial paints, their characteristics and types of applications will help you to identify potential problems and better guide the application needs.

industrial paint, industrial paint manufacturers, industrial paint suppliers, industrial paint manufacturer, industrial paint supplier, industrial coating manufacturers, industrial coating suppliers — **Industrial Paint: Information and Characteristics**

What is industrial paint?

Technically, we can say that industrial paint is a product, which is presented in the form of liquid, paste or powder and applied to the surface by proper process, it is converted into solid, plastic, sticky film by curing process. Protects and / or binds together.

By focusing on the industrial sector, we can define an industrial coating as a product that includes painting, structural protection and maintenance processes, machinery, consumer goods, and any product related to a specific industrial sector.

Purpose of industrial paint

Industrial paint has two main objectives:

On the one hand, to protect the various supports from physical (impact) and chemical and environmental (rust, weather, etc.) attacks.
On the other hand, its extra value is to give the part a good aesthetic look, to complete the optimal, even to enhance.

Since this last point is somewhat more subjective and difficult to evaluate, we will focus on the information on the painting system which guarantees the best performance depending on which medium will be displayed.

An Industrial Paint Manufacturer of high repute today, our organisation was set up will a single goal of producing and providing high quality, customer specific coating solutions.

Company’s professional work culture coupled with customer centric flexible approach has enabled the organization to be considered as a strong regional Industrial Paint Manufacturers.

To fulfill this purpose, industrial paints are basically made of the following. Components:

Elements that make up industrial paint

PigmentsInformation

Its purpose is mainly to give the paint coat color and opacity. These are usually solids in the form of extremely fine particle-sized powders, which are broken down into primary particles to achieve maximum color efficiency through a proper milling process in the presence of a binder.

The different pigments can be classified as:

Covering pigments are most commonly used. They provide opacity to the paint by the combined effect of the refractive index of light reflected on the binder, granulometry and paint coat.
Corrosion resistant pigment: Used in the first coat of direct contact with primer or steel, anodic or corrosion resistant and prevents. Cathodic inactivation of electrochemical currents on the metal surface.

Special Pigments: Some pigments used in industrial coatings cannot be classified into the above categories due to their specificity:

Metal pigments.
Pearlescent pigments.
Intumescent pigments.
Toxic pigments.

Binders

This is the basic component of the paint that allows a sticky film to form after the paint dries. The mechanical and chemical properties of paints depend on the binder and hence their protective ability.

Technically, they are polymers of low or medium molecular weight, which are formed by the action of oxygen in the air, heat, etc. Are formed. Their polymerization rate increases more or less until plastics and insoluble solids are formed. Here are some examples of binders:

Alkyd resins.
Acrylic resins.
Vinyl resins.
Epoxy resins.
Polyester resins.
Polyurethane resins.
Cellulose resins.
Chlorinated rubber resins.
Etc.

Solvents

The purpose of solvents is basically to allow the paint to be applied, although the chosen process gives it the right consistency, solvent-free paints are based entirely on pigments and binders, usually with a very high viscosity. The second goal is to enable this product.

Paint and keep it consistent in the container.

Different types of solvents are commonly used to control solubility, ease of use, smoothness, etc. in a single paint. For example: aliphatic hydrocarbons, aromatic hydrocarbons, alcohol, chlorides, ketones etc.

Any type of paint, regardless of its composition, application or function, can be defined by a range of measurable features that must be controlled by both the industrial paint manufacturers and the user and must determine whether the product is in good condition and adhere to the features.

More about information for industrial paint manufacturers then Visit our site –

https://www.zigmapaints.com/

What are Etch Primers? Advantages & When Should they not be used?

Etch Primers is a single pack metal primer designed for this purpose. Prepared with a combination of resins for maximum adhesion to various metals, the surface on which they can be used. These are Etch Primers for digging and repairing low levels of phosphoric acid, sticking to metal surfaces. Coatings also contain zinc phosphate anti-corrosion. Pigments for steel surfaces. One important thing to note is that they are made with a low noise density to hold the product (10 – 15 hours).

Etch Primers

Etch Primers is a paint designed to physically adhere to the substrate to which it is applied.

This is achieved by mixing the acid in the paint so that the acid can scratch the surface of the layer, thus creating both physical and chemical bonds.

In most cases, H will be added to the primer to make the color visible.

Etch primers are often designed to work with ferrous or non-ferrous metals or in some cases both.

It is also advisable to use Etch Primers on fiberglass and resin molding. Made with a fiberglass gel coat which is strong and durable without the need for paint. Resin kits are made using the same chemical process as two-part epoxy resins.

This can lead to molding of complex parts, but it can leave a surface that is ‘slippery’ and does not accept paint. It is also possible to move the remains. Molding and / or leach paint in molding.

What are Etch Primers? Advantages & When Should they not be used?

When Should they be used?

Etch Primers is a new or relatively primer for use as sound ferrous and non-ferrous metal surfaces. Examples of surfaces on which these products will be used are lightweight tubes or thin sheet metal surfaces that cannot be formed by abrasive blast cleaning. In such cases, the combination primer usually has hand / power tool friction and the acid provides sufficient adhesion to allow the use of a thin-film two-pack full rusty surface or one that can be prepared in a tolerant or conventional manner for abrasive blast cleaning surfaces. Two-pack epoxy primer. Will provide better service, as these products offer longer corrosion protection than Etch Primers.

Advantages of Etch Primers

This type of product has advantages over other metal Etch Primers:

As follows:

Provides excellent adhesion to various metals.
Can be applied with minimal preparation (clean, degreasing and abrasive, see datasheet) .
Quick treatment allows significant overcoating with a thin-film topcoat less than 1 hour.
Zinc phosphate pigmentation Provides. Prevention and protection.

Applying Etch Primers

Most of the problems faced by both modelers and model engineers with Etch primers are due to improper cleaning of the product and / or application. To ensure that the primer adheres well to the substrate, the following steps must be taken.
Wear rubber gloves first to ensure that fingerprints do not return to a clean surface.
Reduce the surface with the strongest solvent available. In most cases, it will be a PQ17 pre-painted metal cleaner for all metal surfaces and a PQ19 pre-painted multi-surface cleaner for fiberglass and resin molding.
Apply the cleaner on a clean lint-free rag (old cotton shirt, T-shirt, etc.), wipe the surface and leave to dry.
This should be done at least twice to make sure the surface is clean and free of grease and dirt.
Alternatives to white spirit and turpentine should not be used as they are not strong enough at first and secondly they leave a residue on the surface.
All types of household, kitchen, bathroom and toilet cleaners should also be avoided as they all contain chemicals. While clean surfaces are designed to be shiny and shiny, while suitable for your home surface or for crockery, chemistry can affect Etch’s performance. Etch Primers for sticking to the substrate.

Precautions

This precaution is typical for all single-packs of Etch Primers:

The product is for use in thin-film systems (total 50 – 100 m film thickness) and therefore cannot be expected to provide a level Rust protection can be achieved with a protective coating. System.
Dissolution of the coating higher than the recommended film (usually about 10 m risk).
Relatively small and restrictive remote windows can cause problems for large jobs.
Brush and roller applications are only suitable for small parts; Primerspray to form a thin and uniform film.

Established in 1992, Zigma Paints (P) Ltd. has carved out a name for itself in the list of top suppliers of all types of thinners, coatings & paints in India. We are ranked among reliable manufacturers, distributors and suppliers of pure quality Etch Primers paints in Nashik, India.

Zigma Paints (P) Ltd. We have been involved in manufacturing and offering high quality products of etch priming paints for many years.

More about information for Etch Primers then Visit our site –

https://www.zigmapaints.com/etch-primers-paints.php

What are red oxide metal primers? use & Advantages

Red oxide metal primers act as a preparation or protective coating that prevents the formation of rust on the surface of ferrous metal in contact with moisture and air. The primer used for gates, railings and outdoor equipment is applied to the rusted surface before applying the topcoat.

Red Oxide Metal Primers

Red oxide primer is a specially formulated coating used as a base coat for ferrous metals. Red-oxide primer works much like interior wall primers because it makes your metal for the topcoat, but it also provides a layer of protection to the iron and steel surface. Working with Red Oxide Primer is not difficult, but it does help to be aware of some safety precautions and application tips.

Benefits of Red Oxide Metal Primers

Acts as a binding medium for paint coatings.
Red oxide metal primers zinc chromate primer can be applied to porous materials to smooth the surface so that the best results are obtained after applying the latter coat.
Its rust-resistant properties eliminate the possibility of rust. Surfaces in ferrous metals.
Metal primer increases the durability of the paint and extends the life of the material.

Uses of Red Oxide Primer

In general, Red oxide metal primers are applied to the outer and inner ferrous metal surfaces. The product has excellent opacity and adhesion properties. Note, however, that the metal primer differs from the Red oxide metal primers in that it comes with corrosion-resistant and rust-resistant properties.

Red oxide primer is formulated for ferrous metals containing iron components. You can use a magnet to determine the type of metal. Unlike nonferrous metals, ferrous metals have magnetic properties. This primer variety is also not suitable for bituminous or asphalt surfaces.

How to prepare the surface before applying red oxide metal primers?

Before applying red oxide zinc chromate primer on the surface, make sure that it is free from oil, grease, dust and dirt. The layer should be very clean. It is best to clean the surface using a good quality compress solution. This will not only clean the surface but also create metal components for paint overcoating.

Precautions to ensure safe handling of red oxide metal primers

Safe and standard procedures must be ensured when using a red oxide primer to reduce the risk or risk of injury. Do not use a red oxide primer near any ignition source (such as cigarettes or open flames) as the product is flammable.

Keep your workspace doors and windows open when working with Zigma Paints red oxide metal primers. Choose the right ventilated area for work. Alternatively, you can exercise. Be sure to wear a painter’s mask, protective clothing, safety gloves and goggles to protect yourself from spray and vapor inhalation.

Application and Drying Time

Use a brush or small pile roller when applying red oxide primer. Thinning is not necessary when applied with a brush or roller. If you are using an airless sprayer to apply a red oxide primer, dilute the primer 10 to 15 percent with acetone, xylene or synthetic reducer. Start diluting with as little solvent as possible and add more until proper consistency is reached.

Spray the Red oxide metal primers on the surface at a working pressure of at least 2000 psi. Use at least two coats of Red oxide metal primers to give your metal a sufficient base coat. Each coat will be dry to the touch in about 2 hours, but will not heal completely in about 6 hours. The red oxide primer will not be ready for the overcoat until it dries in 16 to 24 hours. Always check the manufacturer’s label for specific instructions when drying.

Zigma Paints (P) Ltd. We are engaged in manufacturing and offering high quality Zinc Phosphate Primer products which are also available in other types like Green Zinc Phosphate, Zinc Phosphate Yellow Primers. Our Zinc Phosphate Primer is a fast drying, high build, modified alkyd rust-inhibiting metal primer.

Bare aluminum and steel sigma zinc phosphate primers are recommended for maximum adhesive bare metal priming. Zinc phosphate metal primer has excellent adhesion properties and also has a very high corrosion resistance. These primers give maximum bond to bare aluminum and steel. Zigmas primers have been in the industry for many years.

More about information for Red oxide metal primers then Visit our site:- https://www.zigmapaints.com/red-oxide-zinc-chromate-primers.php